Moog PB24M24 Istruzioni per gli Interventi Scaricare il pdf (Pagina 10)

Wireless Conguration

2.1

Note that the Wireless mode for this unit is

set to Station and the default SSID for the

wireless network is set to videolarm.

The default SSID can be changed by clicking

on the Select button next to the SSID box.

A new window will appear that will show

all of the wireless networks within range of

the device.

Select the required SSID (if it was changed in

the previous steps), and click on the Select

button at the bottom right hand corner of

the window.

Click on the Wireless tab on the conguration page.

• Connect to the PB24M24/58 by opening a web browser and connecting to http://192.168.1.100.

username and camera for the password.

Click on the Network tab on the

conguration page.

Note that a static IP address of 192.168.1.100

has been assigned to the unit as default.

The default IP address, subnet mask, and

gateway can all be changed from this screen

if needed.

Click in the corresponding box and enter in

the required IP setting, then click the Change

button in the bottom right hand corner of

the window.

NOTE - Connection to the PB24M24/58 will be lost if the IP address is changed at this time. A connection will need

to be made to the new IP address that has just been assigned in order to view the conguration page again.

1 2 ... 5 6 7 8 9 10 11 12 13

Nessun commento

Moog PB24M24 Istruzioni per gli Interventi Pagina 10